Audi A6 C6 Front Bumper Removal Guide

If you're planning to install OEM front PDC sensors, upgrade the grille, or perform any front-end repairs, you'll first need to remove the front bumper on your Audi A6 C6.

This DIY guide shows you how to safely remove the Audi A6 C6 front bumper step-by-step using common tools.

🧰 Tools Required:

• Flat screwdriver
• T30 Torx
• T25 Torx
• 10mm hex socket
• Philips screwdriver or 7mm hex socket
• Empty bottle to catch windshield washer fluid

🔧 Process Overview:

1. Disconnect windshield washer hose — prepare an empty bottle to collect the fluid.
2. Use the flat screwdriver to carefully release bumper clips.
3. Remove T30 and T25 Torx screws from the wheel arches and under the bumper.
4. Remove 10mm hex bolts securing the bumper to the chassis.
5. Detach the front grille screws (Philips or 7mm hex).
6. Carefully pull the bumper forward and disconnect any electrical connections (e.g. fog lights, parking sensors).
7. Place the bumper safely on a soft surface to avoid scratches.

This guide is essential if you're preparing for the next project—OEM PDC sensor installation on your Audi A6 C6.

👉 Subscribe for more Audi A6 C6 DIY upgrades and repair tutorials.